三维有限元分析在跟骨骨折研究中的进展

毅 张(承德医学院，中国)
培 王(承德医学院附属医院手足外科，中国)

摘要

随着计算机技术的迅速发展，三维有限元分析方法已经成为生物力学研究的重要方法之一。由于尸体标本来源短缺，无法对其进行不同载荷条件下的重复研究，三维有限元分析的优势越发突出。论文就三维有限元在跟骨骨折研究中的应用进展做一综述。

关键词

跟骨；骨折；有限元分析

参考

Tsubone T, Toba N, Tomoki U, et al. Prediction of fracture lines of the calcaneus using a three-dimensional finite element model[J]. Journal of Orthopaedic Research®,2019,37(2):483-489.

Wong D W, Niu W, Wang Y, et al. Finite Element Analysis of Foot and Ankle Impact Injury: Risk Evaluation of Calcaneus and Talus Fracture[J]. PLOS ONE,2016,11(4):154435.

Pan M, Chai L, Xue F, et al. Comparisons of external fixator combined with limited internal fixation and open reduction and internal fixation for Sanders type 2 calcaneal fractures: Finite element analysis and clinical outcome[J]. Bone Joint Res,2017,6(7):433-438.

Guo Z H, Yan Y Q, Tang Y, et al. Finite element optimization analysis of minimally invasive screw treatment for Sanders typecalcaneal fracture[J]. Zhongguo Gu Shang,2021,34(2):137-142.

He K, Fu S, Liu S, et al. Comparisons in finite element analysis of minimally invasive, locking, and non-locking plates systems used in treating calcaneal fractures of Sanders type II and type III[J]. Chin Med J (Engl),2014,127(22):3894-3901.

Chen C, Hung C, Hsu Y, et al. Biomechanical evaluation of reconstruction plates with locking, nonlocking, and hybrid screws configurations in calcaneal fracture: a finite element model study[J]. Medical & Biological Engineering & Computing,2017,55(10):1799-1807.

Qiang M F, Singh R K, Chen Y X, et al. Computational Biome-chanical Analysis of Postoperative Calcaneal Fractures with Different Placement of the Sustentaculum Screw[J]. Orthopaedic Surgery,2020,12(2):661-667.

Pang Q J, Yu X, Guo Z H. The sustentaculum tali screw fixation for the treatment of Sanders type II calcaneal fracture: A finite element analysis[J]. Pak J Med Sci,2014,30(5):1099-1103.

Pazour J, Horák Z, Džupa V. Does the position of a sustentacular screw influence the stability of a plate osteosynthesis of a calcaneal fracture? A biomechanical study[J]. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 2021,235(9):993-1000.

Ni M, Wong D W, Niu W, et al. Biomechanical comparison of modified Calcanail system with plating fixation in intra-articular calcaneal fracture: A finite element analysis[J]. Medical Engineering & Physics,2019(70):55-61.

Yu B, Chen W C, Lee P Y, et al. Biomechanical comparison of conventional and anatomical calcaneal plates for the treatment of intraarticular calcaneal fractures—a finite element study[J]. Comput Methods Biomech Biomed Engin,2016,19(13):1363-1370.

Ouyang H, Deng Y, Xie P, et al. Biomechanical comparison of conventional and optimised locking plates for the fixation of intraarticular calcaneal fractures: a finite element analysis[J]. Comput Methods Biomech Biomed Engin,2017,20(12):1339-1349.

Ni M, Wong D W, Mei J, et al. Biomechanical comparison of locking plate and crossing metallic and absorbable screws fixations for intra-articular calcaneal fractures[J]. Science China Life Sciences, 2016,59(9):958-964.

Gultekin A, Acar E, Ugur L, et al. The importance of Bohler’s angle in calcaneus geometry: A finite element model study[J]. Jt Dis Relat Surg,2021,32(2):420-427.

Xu C, Liu H, Li M, et al. A Three-Dimensional Finite Element Analysis of Displaced Intra-Articular Calcaneal Fractures[J]. The Journal of Foot and Ankle Surgery,2017,56(2):319-326.

Zhang X, Wu H, Zhang L, et al. Calcaneal varus angle change in normal calcaneus: a three-dimensional finite element analysis[J]. Medical & Biological Engineering & Computing,2017,55(3):429-437.

Zhang H, Lv M L, Liu Y, et al. Biomechanical analysis of minimally invasive crossing screw fixation for calcaneal fractures: Implications to early weight-bearing rehabilitation[J]. Clinical Biomechanics, 2020(80):105143.

DOI: http://dx.doi.org/10.12345/yzlcyxzz.v5i2.11294